Parts of a sword diagram: labeled European longsword showing pommel, peen, grip, tang, crossguard, ricasso, fuller, edge, point, forte and foible
Quick Summary:
  • A sword has three main parts: the blade, the hilt (the handle) and the scabbard.
  • The blade runs from the point to the tang: point, edge, fuller, ricasso, and the tang hidden inside the handle.
  • The hilt has three parts: the guard that protects your hand, the grip you hold, and the pommel that balances the blade.
  • A katana has the same parts under Japanese names: kissaki (point), tsuba (guard), tsuka (hilt), saya (scabbard).
  • Two interactive diagrams below: tap any part of a European longsword or a Japanese katana to see its name and what it does.

Last updated: November 2026

A sword has three main parts: the blade, the hilt and the scabbard. The blade is the steel that cuts and thrusts, the hilt is the handle assembly made of the guard, the grip and the pommel, and the scabbard is the sheath that protects the blade when the sword is carried.

Each of those three parts breaks down into smaller ones, and every one of them has a name and a job. This guide names them all, first on a European sword, then on a Japanese katana, with a labeled diagram for each. If you only want the handle in detail, we have a full guide to the sword hilt.

What are the parts of a sword?

Blade, hilt, scabbard. The blade includes the point, the edge, the fuller, the ricasso and the tang. The hilt includes the guard, the grip and the pommel.

Interactive diagram: tap a part of the sword to see what it is.

PommelcounterweightGripwhere your hand goesCrossguardeach arm is a quillonFullergroove that lightens the bladeEdgesharpened on both sidesPointthe tipPeentang end, hammered flatTanghidden inside the gripRicassounsharpened sectionFortestrong half: you parry hereFoibleweak half: you cut and thrust hereHILTBLADE
PointEdgeFullerFoibleForteRicassoCrossguardGripTangPommelPeen
Pick a part

Tap any part of the diagram, or one of the names above, to see what it is and what it does.

Here is every part on the diagram, from the tip of the blade to the end of the handle:

Part Where it is What it does
Point Tip of the blade Thrusting
Edge Sharpened side of the blade Cutting
Fuller Groove down the middle of the blade Makes the blade lighter without making it weaker
Foible Half of the blade nearest the point The fast, light half: cuts and thrusts
Forte Half of the blade nearest the hilt The strong half: blocks and parries
Ricasso Short unsharpened section above the guard Lets a finger or a hand rest on the blade safely
Tang Inside the handle Holds the blade and the hilt together
Guard Between the blade and the grip Protects your hand
Grip Middle of the hilt Where you hold the sword
Pommel End of the hilt Balances the blade and locks the hilt together
Scabbard Separate from the sword Protects the blade, and you, when the sword is carried

The blade: every part from point to tang

The blade is the whole piece of steel, including the part you cannot see. It starts at the point and ends at the tang, which is hidden inside the handle.

Point

The point is the tip of the sword and the part used for thrusting. A narrow, reinforced point is made to pierce, while a broader, rounder one belongs to a sword built mainly for cutting.

Edge

The edge is the sharpened side of the blade. Most European swords are double-edged: both sides are sharp. On those, the edge facing your opponent when you hold the sword normally is the true edge, and the one facing you is the false edge. Sabers, cutlasses and katanas are single-edged: one sharp side, and a thick unsharpened side called the back or spine.

Fuller

The fuller is the groove that runs down the middle of many blades. It removes steel where the blade needs it least, which makes the sword lighter while keeping it stiff, the same principle as an I-beam. You will often see it called a blood groove. That name is a myth: the fuller has nothing to do with blood.

Forte and foible

Fencers divide the blade in two. The forte ("strong" in French) is the half nearest the hilt. You have the most leverage there, so it is the part you block and parry with. The foible ("weak") is the half nearest the point. It moves fastest, so it is the part that cuts and thrusts.

Ricasso

The ricasso is a short unsharpened section of blade just above the guard. Not every sword has one. On rapiers it lets you loop a finger over the guard for better point control. On the big two-handed swords of the sixteenth century it was long enough to be gripped with a whole hand.

Tang

The tang is the part of the blade that continues inside the handle. It is the most important part you cannot see, because it is the only thing holding the blade to the hilt. On a well-made sword the tang is one piece with the blade and runs the whole length of the grip: that is a full tang. On cheap decorative swords it is often a thin rod welded to the blade, known as a rat-tail tang, and that weld is where the sword breaks. Our full tang buying guide shows how to check before you buy.

The hilt: guard, grip and pommel

The hilt is the handle of the sword. It has three parts: the guard protects your hand, the grip is where you hold, and the pommel caps the end.

Guard

The guard is the part of a sword that protects your hand. It sits between the blade and the grip and stops an opponent's blade from sliding down onto your fingers. On a medieval sword it is a straight bar called the crossguard, and each of its two arms is a quillon. Later swords grew bigger guards: the cup of a rapier, the bowl-shaped guard of a fencing épée, the basket of a Scottish broadsword, the knuckle bow of a saber or cutlass.

Grip

The grip is the part of the sword you hold. It is usually a wooden core built around the tang and covered in leather, cord or wire so it does not slip. Its length tells you how the sword is used: a short grip for one hand, a longer one for two. That measurement matters more than the name on the listing, as we explain in greatsword vs longsword.

Pommel

The pommel is the knob at the end of the handle. It does three jobs: it counterbalances the blade so the sword feels lighter in the hand, it stops your hand from sliding off, and it locks the hilt onto the tang. The word comes from the Old French pomel, "little apple", because of its shape.

Peen

The peen is the end of the tang where it comes out through the pommel and is hammered flat, like a rivet. It is what keeps the whole hilt tight. Many modern swords use a threaded pommel or a nut instead, which lets you take the sword apart.

Pommel shapes, grip types and guard styles each have their own names. They are all covered in our guide to the parts of a sword hilt.

The scabbard: the part that is not on the sword

The scabbard is the rigid sheath that holds the blade. It protects the edge from damage and rust, and it protects you from the edge.

A European scabbard is usually a wooden core covered in leather, with two metal fittings:

  • Throat (or locket): the reinforced opening at the top, where the blade goes in.
  • Chape: the metal cap at the bottom, which stops the point from wearing through.

Some medieval swords also have a rain guard, a small flap of leather fixed at the guard that covers the mouth of the scabbard and keeps water out. If you are not sure whether to say scabbard or sheath, see the difference between a scabbard and a sheath.

Parts of a katana: the Japanese names

A katana has the same three parts as any sword, under Japanese names: the blade, the tsuka (hilt) and the saya (scabbard). The guard is the tsuba and the point is the kissaki.

Interactive diagram: tap a part of the katana to see its name in English.

Habakiblade collarMunethe back (spine)Shinogiridge lineKissakithe pointYokoteline where the point beginsHamontemper lineHathe cutting edgeTsubaguardFuchihilt collarTsukahilt: ray skin + cord wrapKashirapommel capMenukiornaments under the wrapMekugipeg through the tang (nakago)Koiguchiscabbard mouthKurigataknob for the cordSageocordSayascabbardKojiriend cap
KissakiYokoteHaMuneShinogiHamonHabakiTsubaFuchiTsukaMenukiMekugiKashiraSayaKoiguchiKurigataSageoKojiri
Pick a part

Tap any part of the diagram, or one of the names above, to see what it is and what it does.

Prefer a picture to save? Open the katana diagram full size.

What makes the katana different is that it is built to be taken apart. The hilt is not hammered onto the tang: it is held by a single bamboo peg, the mekugi. Take the peg out and the whole sword comes apart for cleaning.

Japanese name English equivalent What it is
Kissaki Point The tip section of the blade
Yokote (no equivalent) The line that separates the point from the rest of the blade
Ha Edge The single cutting edge
Mune Back, spine The thick unsharpened side
Shinogi Ridge The ridge line that runs along the side of the blade
Hamon Temper line The visible line of the hardened edge
Hi (bo-hi) Fuller The groove that lightens the blade
Nakago Tang The part of the blade inside the hilt, where the smith signs
Habaki Blade collar The metal collar that locks the blade in the scabbard
Tsuba Guard The round or squared plate that protects the hand
Seppa Spacers The thin washers on each side of the guard
Tsuka Hilt The handle: a wooden core, ray skin and a cord wrap
Tsuka-ito Grip wrap The cord wrapped in a diamond pattern
Menuki Ornaments The small ornaments under the wrap, which also fill the palm
Mekugi Peg The bamboo peg that holds the hilt on the tang
Fuchi Collar The metal collar at the top of the hilt
Kashira Pommel cap The metal cap at the end of the hilt
Saya Scabbard The lacquered wooden scabbard
Koiguchi Throat The mouth of the scabbard
Kurigata Cord knob The knob on the scabbard that the cord passes through
Sageo Cord The cord that ties the scabbard to the belt
Kojiri Chape The end cap of the scabbard

The most famous of these parts is the hamon. It appears when the smith coats the blade in clay before quenching it, so that the edge cools fast and hardens while the back stays softer. We explain the process in clay tempered katana and how to recognise a real one in everything about the hamon. For each part in more depth, see our complete katana parts guide.

European sword vs katana: same jobs, different names

Every part of a European sword has a Japanese counterpart. The jobs are the same. The main difference is construction: a European hilt is fixed for good, a katana hilt comes apart.

Job European sword Katana
Thrusting Point Kissaki
Cutting Edge (often two) Ha (one)
Lightening the blade Fuller Hi, bo-hi
Holding blade and hilt together Tang, peened over the pommel Nakago, held by the mekugi peg
Protecting the hand Crossguard Tsuba
Holding the sword Grip Tsuka
Capping the handle Pommel Kashira
Carrying the sword Scabbard Saya

The two swords also balance differently. A longsword uses a heavy pommel as a counterweight. A katana has no heavy pommel: its balance comes from the taper of the blade and the long two-handed hilt. For the full comparison, read katana vs longsword.

How to read a sword's spec sheet

Once you know the parts, a product page becomes easy to read: blade length is measured from the guard to the point, and handle length is the hilt.

Take two swords we ship. The Ravenfang Longsword is listed at 118 cm overall, with an 84 cm blade and an 18 cm handle in 5160 steel. Blade plus handle does not equal the overall length: the difference is the guard and the pommel. The Nami Katana is listed with a T10 steel blade with hamon, a carved copper tsuba, a tsuka covered in ray skin, a set of menuki and two bamboo mekugi. Every word of that list is a part from the table above.

Four checks worth making before you buy any sword:

  • Tang: look for "full tang" on the listing. It is the one part that decides whether a sword is safe to swing.
  • Hilt: nothing should rattle. A guard or pommel that moves means the hilt is loose on the tang.
  • Hamon: on a katana, a real hamon comes from clay tempering. A line that is only etched or brushed on is decoration.
  • Scabbard: the blade should stay in when you turn the sword upside down, and come out without forcing.

You can see all of these parts on real swords in our katana collection and our medieval swords.

Parts of a Sword FAQ

What are the main parts of a sword?

A sword has three main parts: the blade, the hilt and the scabbard. The blade is the long steel section that cuts and thrusts. The hilt is the handle assembly, made of the guard, the grip and the pommel. The scabbard is the rigid sheath that protects the blade when the sword is not in use.

What is the handle of a sword called?

The handle of a sword is called the hilt. The hilt is the whole assembly you hold and it has three parts: the guard, the grip and the pommel. The grip is only the section your hand wraps around. On a Japanese sword the hilt is called the tsuka.

What is the part of a sword that protects your hand called?

It is the guard. On a European sword the guard is usually a straight bar called the crossguard, and each of its two arms is a quillon. On a katana the guard is a round or squared plate called the tsuba. Rapiers, sabers and cutlasses use larger guards (cups, shells, baskets or knuckle bows) that wrap around the hand.

What is the groove in a sword blade called?

The groove is called a fuller. It removes steel from the middle of the blade to make the sword lighter while keeping it stiff, the same way an I-beam works. It is often called a blood groove, but that is a myth: it has nothing to do with blood. On a katana the same groove is called a hi, or bo-hi.

What is the tang of a sword?

The tang is the part of the blade that continues inside the handle. You cannot see it on a finished sword, but it is what holds the blade and the hilt together. A full tang runs the whole length of the grip. A thin rod welded to the blade, known as a rat-tail tang, is a weak point found on decorative swords.

What is the tip of a sword called?

The tip of a sword is called the point. It is the part used for thrusting. On a katana the point section is called the kissaki, and the line that separates it from the rest of the blade is the yokote.

What is the end of a sword handle called?

The knob at the end of a sword handle is the pommel. It acts as a counterweight to the blade, stops your hand from sliding off and locks the hilt together. The word comes from the Old French pomel, meaning little apple. On a katana the equivalent is a metal cap called the kashira.

What are the parts of a katana called?

The main parts of a katana are the blade (with its point, the kissaki, its temper line, the hamon, and its tang, the nakago), the habaki (blade collar), the tsuba (guard), the tsuka (hilt, covered in ray skin and wrapped in cord) and the saya (scabbard). The hilt is held on the tang by a bamboo peg called the mekugi.

The Bottom Line

  • Three main parts: blade, hilt, scabbard.
  • The hilt is the handle, made of the guard, the grip and the pommel.
  • The tang is the part that matters most and the one you cannot see: check it before you buy.
  • The fuller is not a blood groove. It makes the blade lighter.
  • A katana has the same parts under Japanese names, and it comes apart by removing one bamboo peg.

Related reading: What is a sword hilt? | Katana parts | Katana vs longsword | Greatsword vs longsword


By the Katana-Sword.com Team — sword practitioners and enthusiasts. We have tested blades from manganese to T10 and san-mai, trained with iaido and tameshigiri practitioners, and spent years helping first-time buyers navigate the modern sword market. Questions? Contact us directly.

Our Katanas

See More
Save $120.00
Fuyu Katana — Manganese steel, White wrap, silver patterned saya, blue sageo, silver fittingsFuyu Katana — Manganese steel, White wrap, silver patterned saya, blue sageo, silver fittings
Fuyu Katana 冬
Sale priceFrom $200.00 Regular price$320.00
In stock
Custom-Made Katana — Steel, Black ito wrap, black/gold tsuba, red mouth, black cord-wrapped sayaCustom-Made Katana — Steel, Black ito wrap, black/gold tsuba, red mouth, black cord-wrapped saya
Custom-Made Katana
Sale priceFrom $250.00
In stock
Save $51.00
Enma Katana — 1060 Carbon Steel, Purple ito, gold fittings, purple saya with gold flowers, red sageoEnma Katana — 1060 Carbon Steel, Purple ito, gold fittings, purple saya with gold flowers, red sageo
Enma Katana
Sale priceFrom $199.00 Regular price$250.00
In stock
Save $100.00
Nami Katana — T10 steel, Light grey ito, gold dragon fittings, black saya with gold dragonNami Katana — T10 steel, Light grey ito, gold dragon fittings, black saya with gold dragon
Nami Katana 波
Sale priceFrom $270.00 Regular price$370.00
In stock
Save $51.00
Tanjiro V2 Katana — 1060 Carbon Steel, Black ito, red base, red flower tsuba, black saya, red flames.Tanjiro V2 Katana — 1060 Carbon Steel, Black ito, red base, red flower tsuba, black saya, red flames.
Tanjiro V2 Katana
Sale priceFrom $199.00 Regular price$250.00
In stock
Save $51.00
Sasuke Katana — 1060 Carbon Steel, Black ito, black textured saya, red crescent motifSasuke Katana — 1060 Carbon Steel, Black ito, black textured saya, red crescent motif
Sasuke Katana
Sale priceFrom $199.00 Regular price$250.00
In stock
Save $51.00
Rengoku Katana — 1060 Carbon Steel, White wrap handle, red tsuba, white sheath with zig-zag, orange tip.Rengoku Katana — 1060 Carbon Steel, White wrap handle, red tsuba, white sheath with zig-zag, orange tip.
Rengoku Katana
Sale priceFrom $199.00 Regular price$250.00
In stock
Save $51.00
Giyu Tomioka Katana V2 — 1060 Carbon Steel, White ito wrap, black samegawa, dark red tsuba, black saya, gold kojiriGiyu Tomioka Katana V2 — 1060 Carbon Steel, White ito wrap, black samegawa, dark red tsuba, black saya, gold kojiri
Giyu Tomioka Katana V2
Sale priceFrom $199.00 Regular price$250.00
In stock
Save $230.00
Ghost of Tsushima Premium Swords Kit - Katana & Tanto (Limited) — T10 Hamon Steel, White diamond wrap, black tsuba, blueGhost of Tsushima Premium Swords Kit - Katana & Tanto (Limited) — T10 Hamon Steel, White diamond wrap, black tsuba, blue
Ghost of Tsushima Premium Swords Kit - Katana & Tanto (Limited)
Sale priceFrom $270.00 Regular price$500.00
In stock
Save $51.00
Wado Ichimonji Katana — 1060 Carbon Steel, White wrapped handle, white sheath, gold fittings, white cordWado Ichimonji Katana — 1060 Carbon Steel, White wrapped handle, white sheath, gold fittings, white cord
Wado Ichimonji Katana
Sale priceFrom $199.00 Regular price$250.00
In stock
Save $120.00
Jin Katana — Manganese steel, White wrapped handle, light wood sheath, red patterns, gold accentsJin Katana — Manganese steel, White wrapped handle, light wood sheath, red patterns, gold accents
Jin Katana 寺院
Sale priceFrom $250.00 Regular price$370.00
In stock
Save $51.00
Bleach Ichigo Bankai Katana — 1060 Carbon Steel, Black wrap, red diamond, black saya, gold dragon standBleach Ichigo Bankai Katana — 1060 Carbon Steel, Black wrap, red diamond, black saya, gold dragon stand
Bleach Ichigo Bankai Katana
Sale priceFrom $199.00 Regular price$250.00
In stock